RS5

WHERE LISI PRESS IS MANUFACTORING?

Originating from the Japanese GC Corporation, Lisi Porcelain Teeth (also known as GC Initial® LiSi Press), is made from monolithic lithiumdisilicate glass with High Density Micronization Technology (HDM), using micro-crystals – lithiumdisilicate micro-crystals evenly dispersed throughout the glass frame instead of using traditional large crystals. This exclusive technology of GC helps create pearl-like clear porcelain color. More specifically, Lisi porcelain has very good reflectivity. Giving natural light like real teeth every time you smile.

li

When performing dental restoration with Lisi porcelain veneer, the tooth is almost not ground down, the inside of the tooth is kept intact, so this type of porcelain meets the dental aesthetic needs of a large number of customers.

ssss 2

WEAKNESS AND STRENGTHEN OF LISI PRESS?

LISI Porcelain is considered the “king” of porcelain teeth originating from Japan. Let’s find out why LISI porcelain is chosen by so many medical professionals.

1. Strengthen of Lisi press

  • Aesthetics reach the peak:
    The factor that makes Lisi porcelain superior in aesthetics compared to other products is the translucency due to fluorescent strips. The translucency of natural teeth is determined by fluorescence and Lisi porcelain is also based on this mechanism. Translucency helps teeth have a color-changing effect when exposed to different light areas instead of just being white. Creating a transparent, sparkling pearl-like effect from many angles. Extremely good reflectivity, as natural as real teeth.
  • Excellent load-bearing capacity:
    The load-bearing capacity can be up to 1400 Mpa. Therefore, if you restore with this type of porcelain teeth, you can chew comfortably without worrying about breaking or chipping, the food sensor is the same as real teeth.
  • High biocompatibility:
    This is a benign type of porcelain, so it has absolute corrosion resistance and does not cause any reaction with the oral environment. In addition, Lisi porcelain teeth restoration helps overcome gingivitis, bad breath, and black gum lines. Compatibility has also been biologically proven with medical products over the past 20 years.
  • High thinness, limited tooth grinding
    Being a high-end pressed porcelain line produced with modern technology, Lisi porcelain teeth are much thinner than conventional porcelain teeth, so if you choose to restore with this type of teeth, you will not have to grind many teeth, helping to preserve your original teeth and pulp to the maximum.
li 1

2. Weakness of Lisi press

 

LISI PRESS porcelain teeth have many outstanding advantages, so one obviously obvious is that they have a relatively high price. The cost of this product may be many times higher than other porcelain teeth products, but to have the most suitable and satisfactory teeth, this amount of money is still completely worth it.

DUONG CUOI 2

CÁC TRƯỜNG HỢP NÊN BỌC RĂNG SỨ

nr copy

QUY TRÌNH BỌC RĂNG SỨ TẠI BEDENTAL

1
  • Step 1: General examination and check of oral health
    Before covering porcelain teeth, the doctors will check your oral health in general and remove any remaining residue in the oral cavity to avoid possible oral diseases later. After that, you will have a jaw X-ray to check the condition of your teeth more carefully.
  • Step 2: Develop a treatment plan and choose a tooth model
    From the previous X-ray image, the doctor will use software to analyze and provide a suitable treatment plan for each patient. You will be advised on the steps of covering Venus porcelain teeth with a model simulating different images of the teeth.
  • Step 3: Anesthesia to create and shape the tooth stump to make porcelain crowns
    The doctor begins to anesthetize and grind the teeth. Based on the measured grinding line and tooth size, the doctor will try it on the real tooth to check the harmony and correspondence in color and shape of the tooth. The doctor will also check the gum line, the side contacts as well as the bite to ensure that there are no errors in the porcelain crown. After a full check, the doctor will send the information to the manufacturing room to make the porcelain crown.
  • Step 4: Fix the porcelain crown
    2-3 days after completing the porcelain crown fabrication, you should return to the doctor to install the porcelain crown. To firmly attach the crown and the tooth stump, the doctor will use specialized dental cement to complete the porcelain crown process. Finally, the doctor will instruct on how to care for your teeth and notes to remember to ensure the effectiveness and longevity of the porcelain crown.

BẢNG GIÁ RĂNG SỨ LISI PRESS TẠI BEDENTAL

BG LI

Depending on many different factors, the cost of porcelain teeth will be different. Specifically:

  • Oral health: if the patient is suffering from oral diseases such as pulpitis, periodontitis, tooth decay, etc., it will cost more. Because those conditions will have to be treated by doctors before porcelain crowns, there will be additional costs for this treatment.
  • Mouth position: with problems such as crooked, messy teeth, the cost will be higher than even, beautiful teeth.
  • Number of teeth that need porcelain crowns: the more teeth that need to be crowned, the higher the cost will be.

At BeDental Cosmetic Dentistry, the price of Cercon porcelain teeth is 12,000,000 VND/tooth, which is considered the common price at reputable dental clinics today. In addition, you can also refer to the prices of other types of all-ceramic teeth in the price list below.

OTHER QUESTIONS WHEN CHOOSING CROWN/VENEER

Bọc răng sứ là phương pháp phục hình được nhiều khách hàng yêu thích và lựa chọn. Đây là cách phục tình trạng răng bị ố vàng, có kẽ hở, răng thưa bằng cách mài cùi răng thật và bọc lớp răng sứ giả bên ngoài.

  • Ưu điểm nổi bật của phương pháp này là bảo vệ được chức năng ăn nhai, giúp bạn tự tin với hàm răng trắng sáng và nụ cười rạng rỡ.
  • Bạn nên thực hiện bọc răng khi răng bị khấp khểnh, ố vàng, mẻ răng, răng thưa,....
  • Trên thị trường hiện nay đang có 2 loại răng sứ phổ biến là răng sứ kim loại và răng toàn sứ.
  • Giá bọc răng sứ thẩm mỹ trên thị trường hiện nay dao động ở mức 2.000.000đ – 11.000.000đ/răng.

Viêm nướu răng sứ có thể gây nguy hiểm, dẫn đến mất thẩm mỹ, tụt nướu, và rụng răng

[1]. Nguyên nhân bao gồm vệ sinh kém và lỗi kỹ thuật trong quá trình làm răng sứ

[2]. Điều trị bao gồm lấy cao răng, phẫu thuật nếu cần, và bọc lại răng sứ mới

[3]. Để phòng tránh, duy trì vệ sinh răng miệng, hạn chế thức ăn cứng và thăm nha sĩ định kỳ là quan trọng

Có 4 loại răng sứ phổ biến hiện nay. Dưới đây là thông tin cụ thể các loại răng sứ:

  • Răng toàn sứ: Hoàn toàn được chế tác từ sứ nguyên khối với tính thẩm mỹ và màu sắc gần như tương đồng răng thật.
  • Răng sứ kim loại: Sử dụng hợp kim Niken - Crom hoặc Coban - Crom chế tác với đặc tính bền, chắc nhưng có khá nhiều mặt hạn chế ảnh hưởng đến trải nghiệm sử dụng.
  • Răng sứ Titan: Tương đồng với răng sứ kim loại nhưng nhờ chất liệu Titanium nên khắc phục được một số mặt hạn chế nhất định.
  • Răng sứ kim loại quý: Sử dụng các dòng kim loại quý như vàng, bạc, platin, palladium,... để chế tác. Được đánh giá cao bởi độ bền, tính an toàn.

Mỗi loại răng sứ đều có những điểm nổi bật và hạn chế nhất định, hãy cân nhắc kỹ lưỡng trước khi lựa chọn dòng răng sứ cho bản thân mình

Có nhiều cách chăm sóc răng sứ để đảm bảo răng sứ của bạn luôn trong tình trạng tốt và tránh các tình trạng hôi miệng hay bệnh lý răng miệng. Tuy nhiên, cần lưu ý khi vệ sinh răng miệng, chế độ ăn uống cũng như thay đổi các thói quen xấu để bảo vệ răng sứ và duy trì tính thẩm mỹ lâu dài
Răng ê buốt sau khi bọc sứ gây cảm giác khó chịu, nguyên nhân chính là cơ thể cần thời gian để làm quen với răng sứ mới, thường chỉ diễn ra từ 2–3 ngày là hết. Thực hiện các biện pháp giảm ê buốt như sử dụng đá lạnh ngoại viện, tránh thức ăn nóng lạnh, và uống thuốc giảm đau theo hướng dẫn của bác sĩ. Tuy nhiên, nếu tình trạng này kéo dài hoặc trở nên nghiêm trọng, hãy đến trực tiếp phòng khám để thăm khám và điều trị kịp thời.
Bọc răng sứ là phương pháp thẩm mỹ phục hình răng khá hiệu quả và có độ bền cao. Tuy nhiên, để có được hàm răng đẹp và bền lâu nhất, các bạn cần tham khảo một số lưu ý sau khi phục hình răng sứ như sau:
  • Chế độ ăn uống: Mặc dù răng sứ có độ bền và độ chịu lực khá tốt nhưng đều này không có nghĩa là bạn có thể thường xuyên ăn những thực phẩm quá cứng và dai. Bởi khi chịu tác động mạnh quá nhiều trong một thời gian thì răng sứ cũng trở nên kém bền chắc hơn. Bên cạnh đó, thuốc lá, đồ ăn quá nóng, quá lạnh cũng không tốt cho răng nên hãy hạn chế sử dụng.
  • Vệ sinh răng miệng: Chăm sóc và giữ gìn vệ sinh răng miệng sau khi bọc sứ không khác gì so với răng thật. Bạn chỉ nên chải răng nhẹ nhàng với bàn chải lông mềm và vệ sinh ngày 2 – 3 lần sau ăn, sử dụng chỉ nha khoa hoặc tăm nước thay vì tăm thường. Sau khi hoàn tất việc đánh răng, dùng chỉ nha khoa bạn nên dùng thêm nước súc miệng chuyên dụng để giúp cho hơi thở có mùi thơm hơn.
  • Kiểm tra sức khỏe răng miệng định kỳ: Chăm sóc răng tại nha khoa từ 3 – 6 tháng/lần sẽ giúp nha sĩ phát hiện nhanh chóng các dấu hiệu bất thường của răng sứ hoặc các răng thật khác. Việc khắc phục sớm sẽ giúp khách hàng giảm bớt chi phí và bảo tồn được răng tốt hơn.
medical poster human skull anatomy jaw x ray teeth snapshot doctor looks x ray hologram jaw dentist orthodontist toothache bite scaled
Nha khoa uy tín dành cho các mẹ bầu tham khảo
CSVC 2

HÌNH ẢNH KHÁCH HÀNG LỰA CHỌN RĂNG SỨ VENUS

rang su venus 1 768x768 1
rang su venus 4 768x768 1
rang su venus 2 768x768 1
rang su venus 6 768x768 1

ĐỘI NGŨ BÁC SĨ CÓ KINH NGHIỆM CAO

4 683x1024 1

Thạc sĩ – Bác sĩ Dương Thị Thùy Nga

Bác sĩ chỉnh nha tổng hợp

3 1

Thạc sĩ – Bác sĩ Nguyễn Thị Trang

Bác sĩ tổng quát

2 1 731x1024 2

Nha sĩ – Bác sĩ Ngô Minh Trí

Bác sĩ phẫu thuật Implant

10.000+ KHÁCH HÀNG

TÌM LẠI ĐƯỢC NỤ CƯỜI MỖI NĂM












3: VỆ SINH RĂNG MIỆNG

rang su roland 3 768x768 1

Vệ sinh và xử lý các vấn đề về răng miệng nếu có

4: GÂY TÊ VÀ NHỔ RĂNG

rang su roland 3 768x768 1

Bác sĩ sẽ tiến hành quá trình nhổ răng cho khách hàng

391616168 834532434962847 249126233699455686 n
391615110 834532368296187 6983474671734594455 n
391563222 834532311629526 4745993999525593877 n


ĐỐI TÁC VẬT LIỆU NHA KHOA CHÍNH HÃNG

ĐỐI TÁC BẢO LÃNH VIỆN PHÍ NHA KHOA

img bhbl
jlt 300x161 1
Pjico
PTI 1 300x184 1
pvi logo 3
VNI 300x132 1
cong ty co phan bao hiem hung vuong 1481723782
united 1 300x224 1
thiet ke logo baoviet 1 1026x360 2
LOGO MIC NGUYEN BAN
PC logo primary blue 1

ƯU ĐÃI NGÂN HÀNG & TRẢ GÓP RĂNG SỨ MIỄN LÃI

Untitled 1 1
Noi dung doan van ban cua ban 10 1
6
Untitled 5
Noi dung doan van ban cua ban 11
5

 

Rate this page