WHAT IS MINIVIS? HOW MUCH DOES MINIVIS COST?

What is Minivis? How much does it cost? Minivis is a technique that supports the teeth whitening process more effectively and optimally. When is it necessary to install a protective spray gate? Let’s find out all the questions related to about Minivis to understand exactly What is Minivis?

What is Minivis?

What is Minivis? As we all know, protection is an orthodontic method that helps improve buck teeth, underbites, crooked teeth, drifting, etc. effectively.

During the dental correction process, the doctor needs to use many tools such as brackets, wires, elastics, and minivis (note that not all cases require a minivis). In many cases, using minivis helps teeth achieve better results, controls fascial pulling force, and brings higher orthodontic results.

In some cases, the use of minivis can help improve serration efficiency, control balanced traction and provide more effective dental correction. Teeth screws are small in size, about 12-16mm in length and 1.4-1.6mm in diameter.

In the case of a fused installation needle type, a connecting tube support is usually used. The phenomenon of drifting is created which is very difficult in moving positions. Place your foot in the patient’s jaw. The installation mac has the effect of creating traction, bringing optimal efficiency to the adjustment process.

What is Minivis? This method is often used with metal braces, and the average number of screws is 4, divided equally between the two jaws. However, the doctor will examine each specific case and then recommend a treatment method, as well as the appropriate number and time of insertion to bring about the highest effectiveness.

See more: TOP CERAMIC TEETH LINES THAT ARE POPULAR AT BEDENTAL? HOW ARE THE DIFFERENT SERIES OF PORCELAIN?

The role of minivis in orthodontics

Besides “What is Minivis?”, customers should know about the role of minivis in orthodontics. Braces technique uses traction from orthodontic appliances to move teeth and achieve beautiful alignment on the jaw. When using a bracket system (metal or ceramic), the archwire will use the teeth as a fulcrum to create force to move the teeth.

The doctor needs to place the force in the appropriate position for each treatment case, ensuring the tooth movement meets the correct requirements. In cases of severe misaligned bite, using single braces can be time-consuming and may not achieve the desired results.

For cases where it is necessary to adjust several teeth, close gaps or adjust the bite, the use of minivis is necessary. Minivis acts as an anchor to keep teeth straight and reduce gaps in the dental arch.

The location of braces screws can be between the teeth, near the nose or above the chin, with the common location being screws placed in teeth number 5 and tooth number 6. In some cases, minivis can be used on molar teeth. above.

Why is it necessary to use minivis for braces?

Besides “What is Minivis?”, another common question customers often ask is, “Why is it necessary to use mini screws with braces?” . At the same time, it also brings great benefits to customers such as:

• Screws will create a solid anchor point, move teeth to the correct position on the jaw and alveolar bone, effectively preventing inadequate bite, Better adjustment of bite at the same time.
• Helps improve treatment effectiveness, reducing treatment time from 3 months to 9 months.
• Provides control and stable traction for misaligned teeth.

In addition to providing quick treatment results, screws also help minimize dangerous complications that may occur.

See more: What are dissolvable stiches?

In particular, the splint screws are made of titanium, which is very safe for your health, does not cause irritation or affect your health. mucosa or surrounding teeth.

When should minivis be used?

Besides “What is Minivis?”, another common question customers often ask is, “When should Minivis be used?”. Inserting braces not only increases the desired orthodontic effectiveness but also helps reduce treatment time. This is considered an indispensable tool for difficult orthodontic cases.

However, not all orthodontic cases require screws when wearing braces. Depending on each case, the doctor will have different instructions. Orthodontics is often applied when:

Teeth grow out, protrude, protruding

At that time, the doctor will prescribe the use of braces with a bracket and wire system that will help pull the teeth to the correct position in the jaw to help teeth become more even and beautiful. However, in some difficult cases such as teeth growing crookedly or protruding too much, it is necessary to install screws to create anchors to create more traction when straightening teeth.

Teeth are exposed

You lose harmony and balance, inserting braces screws will have the effect of straightening the teeth, adjusting the jaws to help the bite return to the correct ratio, helping to improve a gummy smile or protruding long teeth but short body. In addition, screw insertion during braces is also suitable for cases of misaligned teeth as well as severe deep bites.

The jaw is too stiff

Jaw arches may require braces because a stiff jaw makes tooth movement and alignment more difficult and time-consuming. Threaded braces, with the support of miniscrews, simplify tooth movement, close gaps faster, and shorten treatment time. This method effectively addresses misaligned teeth and bite issues, restoring a more beautiful and confident smile.

See more: Which country is 3M Lava Porcelain Teeth from? How Many Types Are There? Detailed Review

In cases where tooth extraction is necessary 4.5

Teeth 4 and 5 are often extracted during braces to create space for aligning teeth. In cases where the jawbone is too hard, tooth movement may be slow. Miniscrews are then used to accelerate gap closure, making the orthodontic process faster and more efficient.

Minivis plugging process

Besides “What is Minivis?”, customers should know about minivis plugging process. To ensure optimal results and safety, choosing a reputable dentist for braces is crucial. Following proper procedures minimizes pain and complications. Here’s a brief overview of the screw threading process for orthodontic correction:

• Examination and preparation: The dentist examines the jawbone structure and takes an X-ray, then anesthetizes the area.
• Screw insertion: A specialized tool is used to insert the screw into the jawbone for mechanical and biological stability. The process takes about 5–10 minutes and is generally painless with anesthesia.
• Post-procedure discomfort: Discomfort may occur after the anesthetic wears off, lasting about a day. Pain intensity varies depending on jaw hardness.

But, to achieve that, we need to try our best. Follow pain relief measures such as medication, cold compresses, and oral hygiene to help relieve your discomfort.

After getting braces, you need to pay attention to proper hygiene and care to minimize pain, speed up the orthodontic process, and avoid dangerous dental complications. Specifically, you need to note the following:

• Ice therapy: Ice therapy, if applied regularly, will be an effective way to relieve pain and inflammation. You should apply ice for a few hours, every 15 minutes, then rest for 15 minutes for best results.
• Take medicine as prescribed by the doctor: after placing the minivis, the doctor will prescribe pain relievers and anti-inflammatory drugs. Suitable for each person’s condition so that the wound heals best and supports the braces process more effectively.

However, you should follow the dosage and instructions of your doctor, do not arbitrarily change or buy medicine from a pharmacy. Orthodontic treatment. You should supplement soft foods such as porridge, soup, milk, oatmeal, etc.

See more: ARE METAL CERAMIC DENTAL COVERS HARMFUL? 4 DAMAGES OF METAL CERAMIC DENTAL COLORS?

How much does it cost to plug in a minivis?

Besides “What is Minivis?”, another common question customers often ask is, “How much does it cost to plug in a minivis?”. Depending on the treatment regimen of each dentist, the cost of inserting minivis ranges from 2 – 5 million/screw. The cost of screwing braces is included in the incurred costs. The dentist will calculate and estimate the number of minivis needed from the beginning so that you can financially plan for your entire braces case.

BeDental is a leading French-standard dental system in Vietnam, specializing in braces with over 20 years of experience. The highly skilled team of doctors, trained from basic to advanced levels and members of the European Dental Association, continuously updates modern orthodontic techniques to optimize treatment time and effectiveness.

Equipped with state-of-the-art technology imported from abroad, BeDental ensures the highest standards of care, providing comfortable and efficient braces solutions. With meticulous attention to equipment and expertise, BeDental guarantees a radiant smile, alleviating concerns about pain during treatment.

The above article has helped you answer the question: “What is Minivis?“. Contact Bedental if you want advice on appropriate methods to have more precious information, we will provide free help 24/7.

See more: Got a toothache after getting a tooth filling? Causes and Treatments of Tooth Filling Pain

Tư vấn chuyên môn bài viết:

BÁC SĨ DƯƠNG THỊ THÙY NGA

Bác sĩ chỉnh nha tổng hợp

Ngôn ngữ giao tiếp: Tiếng Việt, Tiếng Anh, Tiếng Nga

Đặt Lịch Hẹn Xem Hồ Sơ

BEDENTAL - TOP STANDARD DENTISTRY SYSTEM

In HANOI

Address 1: 7B Thi Sach St, Ngo Thi Nham, Hai Ba Trung Dist, Ha Noi. - 0934.61.9090

Address 2: 343 Tay Son St, Nga Tu So Ward, Dong Da Dist, Ha Noi. (Nga Tu So Cross) - 0934.61.9090

Address 3: CC2 Tower  Nguyen Huu Tho St, Dinh Cong Ward, Hoang Mai Dist, Ha Noi. (Inside True Hope ) - 0934.61.9090

In HO CHI MINH

Address 1: 53 -55 -57  Pho Duc Chinh St, Nguyen Thai Binh, Dist. 1, Ho Chi Minh. - 0766.00.8080

Address2: 25, City Land urban area, Go Vap Dist, Ho Chi Minh - 0766.00.8080

Working: 9am - 6pm everyday

Website: https://bedental.vn/en/